| STANDARD | |||
| FASTENER TYPE | TORQUE | FASTENER TYPE |
TORQUE N·m (kgf·m, lbf·ft) |
|
5 mm Bolt and nut 6 mm Bolt and nut 8 mm Bolt and nut 10 mm Bolt and nut 12 mm Bolt and nut |
5 (0.5, 3.6) 10 (1.0, 7) 22 (2.2, 16) 34 (3.5, 25) 54 (5.5, 40)
|
5 mm screw 6 mm screw 6 mm flange bolt (8 mm head, small flange) 6 mm flange bolt (8 mm head, large flange) 6 mm flange bolt (10 mm head) and nut 8 mm flange bolt and nut 10 mm flange bolt and nut |
4 (0.4, 2.9) 9 (0.9, 6.5) 10 (1.0, 7) 12 (1.2, 9) 12 (1.2, 9) 26 (2.7, 20) 39 (4.0, 29) |
• Torque Specifications listed below are for important fasteners
• Others should be tightened to standard torque values listed above.
NOTES:
1. Apply oil to the threads and seating surface.
2. Apply grease to the threads.
3. Apply locking agent to the threads.
4. Apply sealant to the threads.
5. Lock nut: Replace with a new one and stake it.
6. ALOC nut or screw: replace with a new one.
7. U-nut.
8. Apply brake fluid to the threads.